Bolt Buster Jr.

This is an innovative addition to the family of maintenance equipment for mines worldwide. It is a convenient and simple to use tool for removing bolts, as well as used liners, from Sag, Cascade, Rod and Ball Mills. As we all know, the sledge hammer and battering ram are a thing of the past. Mill down time and worker's compensation injuries can be drastically reduced by using this tool. McLellan's Pneumatic Semi-Automatic Impact hammer.

Specifications:

Weight Tool/Gun Assy. 1,600 Lbs. Length, Tool/Gun Assy.83" Weight Air Prep/Frame Assy.1,850 Lbs.
Height, Air Prep/Frame Assy. Over All Height, Tool/Gun/Frame Assy. 62 5/8"
Width 38"
Air Requirement; Shop Air
Air Pressure 50/125 PSI
Air Flow (continuous) 30 CFM/ 850 LPM
Air Fitting (source) 1" NPT Boss Coupling Bolt Buster Impact Energy 3,100 Ft. / 4203 joules
Electrical Non Required Recycle Time 2 Seconds
Optional Integral Compressor IR Mdl. 2545 Tooling; Impact, Drifts (8", 14", 18" ) 1.5" Dia. & 2" Dia.
Output 35 CFM@125 PSI
Shop Air, Supplement (if Desired)
Electrical Required As per Client Requirements

Bolt Buster Standard

As we all know, the sledge hammer and battering ram are a thing of the past. Mill down time and worker's compensation injuries can be drastically reduced by using this tool. McLellan's Pneumatic Semi-Automatic Impact hammer.

Specifications:

Weight 1,900 Lbs. or 862 kg
Air Pressure (shop air) 50-150 PSI 340-1030 kPa
Air Flow Rte (continues) 80 CFM 2286 LPM
Air Volume, per cycle 1 Ft. 28lit
Air Fitting (Source) 1" Boss Coupling
Electrical None
Warm up time 0 sec
Length 109" 2.77 m
Width 12" 0.31 m
Height 25" 0.63 m
Impactor reach (w/o drift) 6" 0.15 m
Impactor reach (w/drift, as required) 6"-36" 0.15 m - .91 m
Impactor energy 45-3,200 ft-lb. 61 - 4,340 joules